I have a Monotype diecase for Lanston 12-point #21EFG Binny Old Style which includes most French accents, but was missing question and exclamations marks in both roman and italic, as well as the small cap Z. I was quite pleased…
Category: Kevin
Mystery Monotype Diecase Combs
When running a Monotype Composition Caster to cast from cellular matrices, the matrices are usually contained in a diecase, which holds a 225, 255, or 272 matrices in a grid arrangement. The caster positions this diecase to select the appropriate…
Video: First run of Monotype Compostion Caster Computer Control
I just posted a video on YouTube of the first run of my Monotype Composition Caster under control of my laptop computer. I have been working on the hardware and software for this interface on and off over several years,…
Replacing a defective light switch
A few years ago I installed improved lighting in my basement workshop. Recently I’d been noticing that the light switch sometimes made a “pop” or slight sparking noises when I switched it on or off. This seemed to be getting…
Giving up on Strip Casting (for now)
After several unsuccessful attempts at casting strip material on my Monotype Composition Caster, I’m giving up for a while. The problems I’ve been fighting with include: Unfused strip material, which easily breaks up into pieces Blowback through the nozzle seat…
Are ‘sign’ and ‘sine’ homophones?
At the dinner table last night the conversation wandered into homophones, and at one point ‘sine’ and ‘sign’ were offered as an example, to which I objected. I felt that they are (very subtly) different, but my family and, as…
Making a phone adapter for a tripod
There are a couple of videos I’d like to record. My current camera is 14 years old; it still works fine, but its video quality is poor by modern standards, so until I decide to buy a new camera I…
An Extended Drill Press Table
The table on my drill press is more or less a 12″/30cm square which is fine for drilling smaller objects but once the workpiece is large enough that its center of gravity is more than 6″/15cm from the hole you…
First try at strip casting
I have my Monotype composition caster converted to produce strip material—leading and rule—and this is my first try at running this setup. You can see the inauspicious results in my accompanying YouTube video. I am using a pump body which…
A novel motorcycle air filter (not!)
We’ve had a week of beautiful warm (for November) weather here and I took advantage of this to take my motorcycle (a 1987 Kawasaki EX500) out on several rides. Unfortunately on the last ride the bike decided that it wouldn’t…
Top