After analyzing the problems from my bad casting day, I’ve managed, with some success, to address all the problems (numbered to match the previous post): I disassembled, cleaned, and reassembled the mould, and checked the carrying frame height on the…
Category: Us
Solving caster communications the expensive way
During my Bad Casting Day, I was having problems with the communications between my caster computer interface and the 14-year-old Windows laptop I was using to drive it. They connect using a USB cable, and I thought electrical noise might…
More updated caster pneumatics
One of the conclusions of my Bad Casting Day was that I needed better regulation of the pressure of the compressed air which controls the caster operation. The caster has about 30 pins about 3/8″ (1cm) in diameter which must…
Rebuilding composition mould 12-pt 3E3618R
After my Bad Casting Day, one thing on the to-do list was to tear down the mould because the type being cast had a lot of flash at some of the edges.
A slightly better casting day
After the really bad casting day a few weeks ago, almost anything would be an improvement. I had taken steps to resolve some of the problems, and here is the result:
Wayzgoose is Back!
After a 2-year hiatus due to the pandemic, the Grimsby Wayzgoose Book Arts Fair will be returning this year, on Saturday April 30, 2022, from 9 a.m. to 5 p.m. at the Grimsby Public Art Gallery, 18 Carnegie Lane, Grimsby,…
A Bad Casting Day
Yesterday I made a try at casting a font of 12-point Caslon Old Style using composition mats and the computer interface for the caster.The results were less than stellar. A whole bunch of things went wrong:
Thoughts on Making Lanston Matrix Blanks
There are times where it would be nice to be able to make my own Lanston-style display matrices to use on my Monotype Composition caster. Often I find that matrices made by other casting aficionados were made by cannibalizing a…
Relabeling Those Pesky Caslon Matrices
I recently found a pair of mis-labeled matrices in my set of 18-point Caslon Old Style, and although I could just leave a note in the storage box, I thought it would be better to just correct the markings on…
Improved Shim for my 49A Display Matrix Holder
When I cast display type from Lanston display matrices I use an English mould because the one I have is in generally better condition than the American-made Lanston display moulds I have. This mould’s cavity is not in the same…
Top