For the casting job I have coming up I want to use Monotype medium alloy (74/10/16% Pb/Sn/Sb) rather than the softer Linotype alloy (84/4/12%) currently in the pot, which I was using to cast spacing. To do this, I got…
Category: Us
Grimsby Wayzgoose this Saturday!
This Saturday, April 25th 2015, will see the 37th annual Wayzgoose book arts fair take place at the Grimsby Public Library and Art Gallery. We will have a table there, apparently in the adjacent Carnegie Commons building, where we will…
More store rearranging
This week we had to get a fresh bale of bleached abaca pulp down from the upper tier of the racking in our store. This meant clearing a path for the forklift, which in turn meant moving almost everything. We…
Oh, Carp!
Our property backs onto Alder Creek, which drains some of the area southwest of Kitchener and empties into the Nith River at Ayr. A bit upstream of us, an earth dam forms Alder Lake. There is a spot near us…
Will the real Swing Bold please step forward
I’m getting ready to cast some 18-point Swing Bold (Monotype #217) for someone and I’ve found that my test casts don’t match the samples I received for alignment matching. Each group of 3 letters shows the alignment sample between two…
Lily’s contribution to the collection at THEMUSEUM
Yesterday evening Lily and I were at the monthly Maker Club meeting at THEMUSEUM in Kitchener. This month’s project was to make air-powered rockets using foam pipe insulation for the fuselage and boxboard for the rest. They had two launchers…
American pump on an English caster? Nope!
As part of test-fitting the parts for lead-and-rule casting, I found that there is a critical size difference between the American and English pump bodies. Both these pumps take a ⅞″ diameter piston. The section of the pump that the…
Converting the Composition Caster to Lead-and-Rule casting
One thing I would like to be able to do with my Monotype Composition Caster is to cast spacing and rule. There is a kit of parts required to make the change-over, and I now have most of the necessary…
18 Point Mould in Pieces Again
With my test casting using the American display mould set up for 18 points I found that the feet of the type were wider (pointwise) than the heads of the type. This was probably due to dirt being caught between…
Yesterday’s dumb move
In my last post I mentioned problems with flash and squirts around the seal between the matrix and the display mould. I have since added a comment alluding to the probable cause of this problem: Forgetting to reinstall the link…
Top