The first set of five cases I made to hold Monotype composition matcases turned out to be insufficient to hold them all. I have since made two more cases, and have placed all the matcases I received from Rich Hopkins…
Category: People and Organizations
Fibre Beating Sticks
Last weekend, I put off making more composition matcase cases to give me time to make more of the pulp beating sticks we sell. How many I make depends on how large a piece of maple lumber I can get.…
Strange Squirrels
We seem to have a few squirrels around the neighbourhood that are neither black nor gray. Instead, their bodies are black and their tails fade through a reddish brown to sort of blond. They seem a bit more skittish than…
A little blogging trouble
Over the weekend my WordPress version was updated under me from 3.5.1 to 3.8 (actually the entire system was upgraded). The person who did it did not realize that I had my own code changes to reduce spam comment postings,…
Finished Composition Matrix Cases—Just One Problem
I have completed my five cases for holding Monotype composition matcases. Despite my efforts to get the grooves uniformly deep, I found after assembling the cases that some grooves were too shallow. This meant that I spent a lot of…
Cases for Monotype Composition Matrices
I returned from picking up my display matrix purchases with several matcases of composition mats as well, and so far I have no good place to keep them. The few I had have been stored in the same drawer as…
Things will be abuzz for me Saturday
This Saturday I’ll be attending a one-day workshop on beekeeping. Audrey saw a notice posted at KwartzLab about upcoming workshops, and, since I clearly don’t have enough hobbies to keep me busy, I thought I would give it a go.…
Adventures in Matrix Copying – Part 3
My last post on this subject showed the initial copper plating almost covering the graphite. An hour or two of further plating produced a nice bright copper layer over the entire surface of the rubber mould. The plating was fairly…
Defective Column Pusher Spring Box Fixed
A while ago I made a new spring for the operating lever latch on my Monotype caster, based on specifications passed to me by Bill Welliver. The problem was that when the line length was incorrect, the column pusher was…
Challenge Proof Press Lockup Bar Working
My previous post described my confusion as to how the lockup bar for my Challenge proof press works. As I mentioned in a comment to that post, I found my answer online in US patent number 3288062 which shows how…
Top