We received our Sigwalt Chicago No. 11 press with no chase so it has been sitting collecting dust for a while. I recently cobbled together a chase from a scrap of the ¾″-thick high-density polyethylene (HDPE) sheet we use to…
Category: Equipment
the Papertrail on local TV
CKCO-TV (aka CTV Southwestern Ontario) recently did an item on the Papertrail for their Made Right Here series which features area businesses that have interesting products or services. The 3-minute item was broadcast April 28th 2018, but is also available…
Estimating Dry Weight of Composition Material
While trying to remelt some old composition rollers recently, I found that some of the material wouldn’t melt. Neither higher temperatures nor additional water helped. All I ended up with was a lumpy soup, from which I strained the lumps…
Monotype Computer Control: Diagnosing Air Flow Problems
One observation I have made while testing out my Monotype composition caster computer interface is that not all its ports deliver the same amount of air flow. On some, the air pin in the caster lifts and drops crisply in…
Should the keta stretch the su?
After some thought, I would say “probably not.” I have a su (bamboo screen for Japanese-style paper making) for which I made a keta (combined support frame and deckle) many years ago. I’ve taken the occasional attempt at making paper…
Monotype Computer Control: A Long Overdue Update
My last post about this project was over a year ago, wherein I mentioned that I had purchased the aluminum stock to make the main parts of the valve unit. A lot has happened since then, to the point where…
A Little Printing Job
Last October I was printing some “Save the Date” cards for a customer, and decided to take a video of the work. It only too me 8 months to edit the clips into a single video, but, after much delay,…
Now I know…
…why the Monotype manuals say not to raise or lower the pot unless it is molten. They never explained why this could cause any problems, and the pump piston linkage is jointed enough to follow the pot up and down…
The K-W Maker Expo, Saturday September 19th
The local maker club, Kwartzlab, is spearheading a big event coming up on Saturday, September 19th, 2015 called Maker Expo. This free event centered around Kitchener City Hall will feature all kinds of people and organizations who make things, about…
It’s Getting Real
I actually went out and purchased some aluminum stock for making the computer control valve for my Monotype. That’s a piece of 1″ aluminum square bar which will make the mouthpiece that fits against the air holes in the caster’s…
Top