This is yet another repair I had to make on the Linotype at the MacKenzie Printery and Newspaper Museum. The keyboard assembly has a row of 91 short pushrods, known as the Lower Reeds, which push up when a key…

The knife block on the Linotype at the Mackenzie Printery Museum was pretty much impossible to adjust due to dried out lubricant. This block controls the position of the right knife which trims the thickness of the cast slug to…

One of the tasks I had in getting the Linotype at the Mackenzie Printery and Newspaper Museum working was to repair one of the keyboard reeds which I had broken (I blame the service manual for failing to warn of…

Continuing my work on the Linotype line caster at the Mackenzie Printery and Newspaper Museum, this weekend I adjusted the second transfer alignment, where the matrices are transferred from the second elevator to the distributor bar. On at least two…

Well, this was a real easy diagnosis! Previously I noted that, on the Linotype at the Mackenzie Printery, the safety interlock that stops the machine if the transfer from the first to the second elevator did not appear to be…

As previously mentioned, I’m trying to get the Linotype at the Mackenzie Printery & Newspaper Museum up and running again. I’ve had to fix several problems, and here are the details on one of the problems:

As I mentioned in a previous post, the Linotype at the Mackenzie Printery & Newspaper Museum is having problems with the horizontal transfer from the first elevator to the second elevator. On Saturday I adjusted the alignment between the first…

As previously mentioned, I’m trying to get the Linotype at the Mackenzie Printery & Newspaper Museum up and running again. I’ve had to fix several problems, and here are the details on one of the problems:

As previously mentioned, I’m trying to get the Linotype at the Mackenzie Printery & Newspaper Museum up and running again. I’ve had to fix several problems, and here are the details on one of the problems: The keyboard cams, which…