The 2023 American Typecasting Fellowship conference took place over the weekend of April 30th/May 1st 2023 in the area around Portland, Maine.
Category: Organizations
Progress on the Mackenzie Printery’s Linotype (Lower Reed Comb)
This is yet another repair I had to make on the Linotype at the MacKenzie Printery and Newspaper Museum. The keyboard assembly has a row of 91 short pushrods, known as the Lower Reeds, which push up when a key…
Tagged with: Linotype
Linotype Knife Block R&R
The knife block on the Linotype at the Mackenzie Printery Museum was pretty much impossible to adjust due to dried out lubricant. This block controls the position of the right knife which trims the thickness of the cast slug to…
Tagged with: Linotype
Progress on the Mackenzie Printery’s Linotype (Broken Upper Reed)
One of the tasks I had in getting the Linotype at the Mackenzie Printery and Newspaper Museum working was to repair one of the keyboard reeds which I had broken (I blame the service manual for failing to warn of…
Tagged with: Linotype
American Typecasting Fellowship Meeting this April
After one cancellation and one virtual meeting both due to the COVID-19 pandemic, the American Typecasting Fellowship (ATF) will be holding its first in-person conference since the August 2018 conference hosted by M&H Type in San Francisco. This year’s event…
Tagged with: Ascensius Press
Adjusting the Second Transfer on a Linotype
Continuing my work on the Linotype line caster at the Mackenzie Printery and Newspaper Museum, this weekend I adjusted the second transfer alignment, where the matrices are transferred from the second elevator to the distributor bar. On at least two…
Tagged with: Linotype
Linotype Mystery Parts
On the Linotype at the Mackenzie Printery and Newspaper Museum, there are a couple of parts that I can’t find in any of the parts manuals I have: There is a lug on the slide that transfers the matrices from…
Tagged with: Linotype
Progress on the Mackenzie Printery’s Linotype (Second Elevator Transfer, part 3)
Well, this was a real easy diagnosis! Previously I noted that, on the Linotype at the Mackenzie Printery, the safety interlock that stops the machine if the transfer from the first to the second elevator did not appear to be…
Tagged with: Linotype
Progress on the Mackenzie Printery’s Linotype (Distributor Jams)
As previously mentioned, I’m trying to get the Linotype at the Mackenzie Printery & Newspaper Museum up and running again. I’ve had to fix several problems, and here are the details on one of the problems:
Tagged with: Linotype
Progress on the Mackenzie Printery’s Linotype (Second Elevator Transfer, part 2)
As I mentioned in a previous post, the Linotype at the Mackenzie Printery & Newspaper Museum is having problems with the horizontal transfer from the first elevator to the second elevator. On Saturday I adjusted the alignment between the first…
Tagged with: Linotype
Top