The pump head on my Monotype Composition caster is now back together, except for the pump springs and related parts, which I have to replace with home-made ones to accommodate the pump latch mechanism. The parts to be made or…
Category: People and Organizations
Monotype Pump Latch R&R – Threaded hole repair done
After determining that I had a way to drill the necessary holes without any new tooling, the repair of the threaded holes on the Latch Abutment (58H1) is finished. Even with the holes properly center-punched, I had a little trouble…
Washi workshop: drying the pressed paper
Because it only lasted one day, the participants in our recent Washi workshop were unable to experience the joys of taking the sheets off the post and apply them to drying boards. Over the next couple of days we pressed…
Handmade book for Rural Routes online auction
Just in time for July, I have completed the handmade book which will be auctioned off to help support our studio tour. It will be up for auction through the month of July at our Tour web site’s Auction page.…
Photos from the Washi workshop
Today we held a washi workshop for a lady and her two daughters (and their dog Willow, who was not paying much attention to the proceedings). The lack of names in this post is not because I’m trying for anonymity,…
Preparations for the Washi workshop
In preparation for the Washi workshop we are holding tomorrow, I had to scrounge for all the equipment involved. The last time I used all of this stuff was at the Yahoo Papermaking group’s east-coast gathering in 2010. Since at…
Monotype paint colour matching—Nailed it!
My use of a photo editor to measure the hue and saturation of the paint colours paid off. I had inferred that I had to add to my new paint a mix of two parts red and one part blue.…
Colour-matching Monotype Parts
In my projects to refurbish my Monotype pump and install a latch mechanism, I am now at the stage of needing to repaint some parts, and I am finding it to be a tricky job. For one thing, In can’t…
Papermaking at the Waterloo Mini Maker Faire
Our papermaking demonstration at the Waterloo Mini Maker Faire was a great success! We set up inside the Kitchener City Hall Rotunda to be ready for the opening at 10 am on Saturday, but members of the public were already…
Crossheads reinstalled on Monotype pump head
The two press-fit parts that I probably should never have disassembled on my Monotype caster pump head are now back together again. As mentioned in my previous post I had already reassembled the Pump Body Spring Rod 31H1 and its…
Top