I’ve been using a compact air compressor to run my Monotype Composition Caster. The machine uses pneumatics to control what matrix it casts, when to start a new line, how wide to make the adjustable-width casts, etc. Originally the caster…
I’ve been using a compact air compressor to run my Monotype Composition Caster. The machine uses pneumatics to control what matrix it casts, when to start a new line, how wide to make the adjustable-width casts, etc. Originally the caster…
Continuing my work on the Linotype line caster at the Mackenzie Printery and Newspaper Museum, this weekend I adjusted the second transfer alignment, where the matrices are transferred from the second elevator to the distributor bar. On at least two…
Recently while trying to cast some fonts on my Monotype Composition Caster, I have found that the galley cycles did not operate reliably, forcing me to watch the casting run like a hawk to manually trigger the galley cycle to…
I have recently taken another Monotype mould out of mothballs to use for casting a font of 6-point type. This is one of the moulds I got from Rich Hopkins’ tertiary storage, i.e. his garage. I had cleaned off the…
I recently cast several fonts of type in Monotype #329 Sans Serif Light. This included 12-point from composition matrices and 14-point from display matrices. As with a few other Monotype faces, this one is available as display matrices in two…
On the Linotype at the Mackenzie Printery and Newspaper Museum, there are a couple of parts that I can’t find in any of the parts manuals I have: There is a lug on the slide that transfers the matrices from…
After a couple years of COVID hiatus, the BOUND Book Arts Fair is back! This year’s Fair will be held from 10:30am to 4:30pm at the Arts & Letters Club located at 14 Elm Street, near Yonge & Dundas in…
Well, this was a real easy diagnosis! Previously I noted that, on the Linotype at the Mackenzie Printery, the safety interlock that stops the machine if the transfer from the first to the second elevator did not appear to be…
As previously mentioned, I’m trying to get the Linotype at the Mackenzie Printery & Newspaper Museum up and running again. I’ve had to fix several problems, and here are the details on one of the problems:
As I mentioned in a previous post, the Linotype at the Mackenzie Printery & Newspaper Museum is having problems with the horizontal transfer from the first elevator to the second elevator. On Saturday I adjusted the alignment between the first…