I’ve populated my new PCB with components and after a bit of fiddling, I’ve run a test on it and everything appears to work. The board has a few problems that had to be patched over, including: A missing trace…
Month: July 2025
Our New Type-and-rule Caster in Motion
I’ve cobbled a motor mount and installed a new drive belt, and our new type-and-rule caster now runs: It still needs work, though. For one thing, the belt either needs tension adjustment or some belt dressing so it doesn’t slip…
A PCB for the Monotype Computer Interface
I’ve been slowly plugging away (apparently, for at least 9 years!) at an interface to control my Monotype Composition Caster using a computer. The caster was originally designed to be controlled by a 31-channel punched paper ribbon, which is read…
Top